NPT-200 RELEASE FABRIC
Porous PTFE Coated Glass Fabric
NPT-200 is a porous PTFE-coated plain weave fiberglass cloth release fabric. NPT-200 is resistant to all solvents, adhesives and resin systems normally encountered in composite and metal-bond manufacture. It will release from all commercial resin systems.
NPT-200 is designed as a release fabric that will allow excess resin, volatiles and trapped air to bleed through the release fabric and be absorbed in the bleeder or vented out of the bag through the vacuum vent port. It can be used on metal-bond assemblies to allow the adhesive flash to be bled into the breather and removed from the assembly. NPT-200 is ideal for flat and simple contoured assemblies.
|Substrate Type:||Woven fiberglass (“E” type)|
|Coated Weight, oz./sq. yd (g/sq. m.):||1.92 (65)|
|Air Flow (range), Cu. Ft./Min.:||20 – 80|
|Overall thickness, in. (mm.):||0.0020 – 0.0030 (0.051 – 0.076)|
|Operating Temperature (continuous)||-100 to +500°F (-73 to +260°C)|
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
38″ and 50″ widths available (others by request, minimum quantity may apply)
100 yd. rolls