Hysol XEA 9690


MANUFACTURER

Henkel-Hysol


DESCRIPTION

Hysol XEA 9690 is a modified epoxy film adhesive designed for high peel capability in structural bonds requiring toughness


APPLICATION

Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The adhesive film, with one liner left on it, may be tacked to the detail part for cutting to shape and size. The liner should remain with the adhesive until just before assembly of the detail to the other faying surface. This will minimize contamination of the adhesive bond. The bonded parts should be held in contact until the adhesive has cured. Usually 25 to 50 psi /172 to 345 kPa is sufficient to assure proper mating.


PROPERTIES

Service temperature is defined as that temperature at which this adhesive still retains 1000 psi (6.9 MPa) using test method ASTM D1002 and is 250°F/120°C.