Release Agents

Mold Release Agents

Frekote® brand Release Agents are preferred by more advanced composite molders than all other brands combined. Aircraft Component manufacturers value the non-transferring properties of Frekote® semi-permanent formulations. Other manufacturers rely on Frekote’s® superior multiple release performance. Frekote® semi-permanent release agents are non-silicone materials which bond to tooling surfaces. They do not migrate or contaminate parts, machines or the work environment.

Frekote brand semi-permanent release agents.

Mold Release

FREKOTE 44-NC Provides molders with no release agent transfer (when applied as directed). The multiple release formula gives parts a matte finish.
FREKOTE 700-NC Maximum multiple release formulations. 700-NC dries and cures at a moderate rate.
FREKOTE 770-NC Maximum multiple release formulations. 770-NC is a very rapid drying and curing product with low odor.
B-15 SEALER A sealer or base coat material recommended for porous molds.
FREKOTE FMS-100 A solvent based sealer specifically formulated for use on FRP, epoxy, or other composite mold surfaces.
FREKOTE C-200 C-210 Mold Release Agents
FREKOTE 55-NC Faster evaporating and lower odor version of Frekote 44-NC.
FREKOTE 48-NC Should be your first choice release agent where non transference of release is important.
WOLO A unique polymer release agent that cures quickly and provides multiple release of all polyester resins.
SOLO Contains a unique polymer designed to release all gel-coated fiberglass reinforced and filled polyester composites.
FREKOTE 710-NC Offers excellent release properties for the most demanding applications.
FREKOTE 710-LV Low VOC solvent-based, Room Temperature Cure
FREWAX Mold Release Agent
FMS Formulated specifically as a sealer for fiberglass reinforced polyester, epoxy and other resin-type molds commonly used in the fiberglass molding industry.
FREKOTE 815-NC Designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F).
FREKOTE 1711 & 1711-I Silicone mold release agents offer superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements.
FREKOTE 810-NC The aerosol version of Frekote 815-NC
FREKOTE EXITT EM Water-based silicone emulsion that offers superb release properties, excellent part detail, and provides a water-based alternative to solvent-based products to meet your specific molding requirements.
FREKOTE 800-NC Designed to form a semi-permanent release film on mold surfaces
FREKOTE 720-NC Specially formulated release system for cast polymer and highly porous tools.
HMT A hot mold touch up version of Frekote 44-NC is formulated for use on molds with temperatures above 60°C (140°F).
FRP-NC A unique release interface specifically formulated for reinforced polyester gel coats (and other associated resin systems).
AQUALINE C-600 Milky white emulsion, Water based emulsion, Room temperature cure
FREKOTE CAST URETHANE RELEASE Fast cure, No transfer, Minimal mold build-up, Multiple releases
FREKOTE 901 WB Non toxic waterbased system, Non-flammable
FREKOTE AC4368 Mold Release Agent
FREKOTE 915WB Beige pasty liquid, Water based emulsion, Room temperature cure
FREKOTE LIFFT & LIFFT-I No mold build up, Easy part clean up
FREKOTE S-50 Offers excellent release and slip properties and is recommended for the most demanding silicone rubber molding applications.
FREKOTE 1450 Specifically formulated for use with resin/asbestos products. It has proven to be extremely effective at releasing asbestos/phenolic resin mixtures molded at 150ºC to 165ºC (302°F to 329°F).
PMC A special blend of solvents designed to dissolve and remove wax from polyester molds without dulling the surface.
AQUALINE ROTOLEASE A unique water based release agent designed to provide multiple releases with no contaminating transfer.
AQUALINE RC-321 Provides a durable release film for most rubber molding applications.
AQUALINE R-550 Offers excellent release and slip properties and is recommended for the most difficult molding applications, especially for high aspect ratio parts.
AQUALINE R-500 Unparalleled release and slip properties and is recommended for the most difficult rubber molding applications.
AQUALINE R-180 Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds.
AQUALINE R-150 Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds.
AQUALINE R-120 Designed for rubber molding. When properly applied to a preheated surface, this easy to use product chemically bonds to the mold surface to form a thin, inert, thermally stable coating capable of releasing all natural and synthetic polymers including some thermoplastic urethanes.
AQUALINE R-110 Designed for rubber molding. Chemically bonds to the mold surface to form a thin, chemically resistant coating capable of releasing all natural and synthetic polymers (except silicone elastomers) and thermoplastic urethanes.
AQUALINE PUR-100 For releasing rigid, high-density polyurethane (PU) foam and cast polyurethane parts.
FREKOTE RIMLEASE 8 Specifically formulated for use as a release interface for RIM and R/RIM polyurethane processes.
PUR-NC Designed to form a semi-permanent release coating on the mold surface for rigid, cast polyurethane products with application on a mold with a temperature between 20°-150°C (68°-302°F).
EFR Formulated specifically as a semi-permanent, polymeric release agent for flange sealing.
HMT-2 Loctite® Frekote® HMT-2 is a hot mold touch up version of Frekote 55-NC and is formulated for use on molds with temperatures above 60°C (140°F).
AQUALINE R-100 Designed for application to mold surfaces preheated to between 60°C (140°F) and 182°C (360°F).