Aqualine R-110




Loctite® Frekote® Aqualine® R-110 is a water-based release agent designed for rubber molding. Aqualine R-110 chemically bonds to the mold surface to form a thin, chemically resistant coating capable of releasing all natural and synthetic polymers (except silicone elastomers) and thermoplastic urethanes. Aqualine R-110 cures quickly, gives minimal build-up on the mold surface and does not transfer to the molded part.


Aqualine R-110 should be spray applied to molds preheated to a minimum of 60°C (140°F) and is suitable for application to molds up to 204°C (400°F).
Spray apply Aqualine R-110 using a finely atomized fan pattern. Regulate gun output to 2-3 fl. oz./minute for molds heated to 60ºC – 150ºC (140-300°F) or 4-5 fl. oz./minute for molds above 150ºC (300°F).
At 60°C (140°F), the release agent will dry in a few seconds and will be fully cured after 30 minutes. At 100°C (212°F), this cure time is reduced to 10 minutes.
At 150°C (300°F), Aqualine R-110 dries instantly and requires only four minutes to fully cure (see cure curve).

AppearanceWhite emulsion
Application Temperature60ºC – 204ºC (140 – 400°F)
Special CautionsStore below 40°C (104°F)
Specific Gravity1.00 +/- 0.02
Thermal stability when cured315ºC (600°F)
Shelf Life12 months from the date of manufacture