PVC FILM For Debulk and Compaction Operations
PVC Film is specifically selected for low temperature debulking and compaction operations on
composite laminates for removal of volatiles and air prior to the final cure.
PVC Film can be used in direct contact with the composite surface leaving no residue or
contamination on the composite surface.
|MECHANICAL PROPERTIES||TEST METHOD||TYPICAL VALUES|
|Tensile Strength (psi)||MD||ASTM-D-882||3100|
|Tear Strength (lbs./in.)||MD||ASTM-D-1004||385|
|Heat Shrinkage (%)||MD||ASTM-D-1004||-6|
THERMAL PROPERTIES TYPICAL VALUES
Maximum use temperature 250°F (121°C)
The above values are “Typical Values” which have a nominal range about them and are not
intended for specification purposes.
PVC Film is available in 54″ wide lay flat sheet x .006″+/-