Polyimide Tape 2

Pressure-Sensitive Silicone Adhesive Polyimide Tape 

DESCRIPTION: 
Polyimide Tape 2 is a .002″ thick, translucent polyimide film coated with a .0015″ thick high temperature fully cured silicone adhesive. 

APPLICATION: 
Polyimide Tape 2 is designed for all phases of masking operations where no residue can be tolerated. Polyimide Tape 2 is perfect for holding release films and fabrics, bleeders and breathers, metal and composite details in place during high temperature cures. Polyimide Tape 2 is highly recommended for temperature exposures up to 650°F in vacuum bagging/autoclave operations. 

TECHNICAL DATA: 

TYPICAL VALUES
ColorAmber Translucent
BackingPolyimide
ThicknessFilm .002″ (.05mm); Adhesive .0015″ (.037mm)
AdhesiveSilicone, fully cured
Tensile65 lb./in. width (11.6 kg./cm.)
Adhesion to Steel20 oz./in. width (.22 kg./cm.)
Elongation60% Minimum
Use Temperature650°F max. (340°C max.)

The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes. 

AVAILABILITY: 

Standard Roll Sizes:  1″ x 72 yards 
                                     2″ x 72 yards 

Custom sizes available upon request (minimums may apply)