NNT-200 RELEASE FABRIC
Non-Porous PTFE Coated Glass Fabric
DESCRIPTION:
NNT-200 is a non-porous PTFE-coated plain weave fiberglass cloth release fabric.
NNT-200 is resistant to all solvents, adhesives and resin systems normally encountered in
composite and metal-bond manufacture. It will contain resin and be readily released from
all commercial resin systems.
APPLICATION:
NNT-200 is designed as a release fabric which will prevent resin from bleeding through the
release fabric and into the breather fabric. It can be used on metal-bond assemblies to
promote filleting of the adhesive flash. NNT-200 is ideal for flat and simple contoured
assemblies.
TECHNICAL DATA:
| TYPICAL VALUES | |
| Substrate Type: | Woven fiberglass (“E” type) |
| Coating Medium: | Polytetrafluoroethylene |
| Coated Weight, oz./sq. yd (g/sq. m.): | 4.32 (146) |
| Overall thickness, in. (mm.): | 0.0024 – 0.00304(0.061 – 0.086) |
| Operating Temperature (continuous) | -100 to +500°F (-73 to +260°C) |
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
AVAILABILITY:
38″ and 50″ widths available (others by request, minimum quantity may apply)
100 yd. rolls