Mitsubishi Chemical Carbon Fiber and Composites PAN Fiber

Tow

Continuous filaments bundled together suitable for various processing technique

Precision Cut

Short/cut fiber suitable for compression molding.

Milled

Disoriented filaments for compression molding

FIBER TYPE	Filament Count	Tensile Modulus  msi	Tensile Strength  ksi	Elongation %	Density lb/in3	Yield  yd/lb	X-Sectional Area in2
TRH50	30K	37	810	2.2	0.065	296
TRW40	50K	35	600	1.7	0.065	132
TRH50	60K	36	700	1.9	0.065	155
HS 40	12K	62	670	1.1	0.067	1154
HR 40	12K	54	640	1.1	0.066	827
MS 40	12K	49	640	1.3	0.064	827
MR70	12K	47	1010	2.2	0.066	1182
MR 60H	24K	41	820	2.0	0.065	517
MR40	12K	41	640	1.5	0.064	827
TRH50	18K	36	770	2.1	0.066	496
TRH50	12K	36	710	2.0	0.066	620
TR 50S	15K	34	710	2.1	0.066	496
TR 50S	12K	34	710	2.1	0.066	620
TR 50S	6K	34	710	2.1	0.066	1241
TR 30S	6K	34	600	1.8	0.065	1241
TR 30S	3K	34	600	1.8	0.065	2481
37-800	60K	37	810	2.1	0.065	148
37-800	30K	37	810	2.1	0.065	296
34-700	24K	34	700	2.0	0.065	310
34-700	12K	34	700	2.0	0.065	620
34-600	48K	34	650	1.9	0.065	155

Precision Cut	Sizing	Fiber Length
PA6-2	Polyamide <7%, Epoxy <2	0.25 inches
PU6-1	Polyurethane <3%, Epoxy <2%	0.25 inches
PU6-30	Polyurethane <3.8%, Epoxy <0.2%	0.25 inches
PA6-30	Polyamide <5%, Polyurethane <0.8%, Epoxy <0.2%	0.25 inches
PU6-K	Polyurethane and Vinyl Ester<5%	0.25 inches

Milled	Sizing	Fiber Length µm
GM 130E	1% Epoxy	130µm(mean)

Important:  The technical information contained herein is not to be construed as a specification or warranty, and all warranties, express or implied, including, without limitation, the implied warranties of merchantability and fitness for a particular purpose, and non-infringement are hereby disclaimed.  The information herein may be used for material selection purposes only, and any subsequent transaction with respect to this product shall be subject in all respects to the qualifications, disclaimers, and data set forth in the applicable Safety Data Sheet.