INFUSION MESH 5133
Resin Flow Medium
APPLICATION:
5153 Infusion Flow Green medium works well with polyester, vinylester and epoxy resins.This product does not fray or roll up at the ends when cut. 5153 Infusion Flow Green is designed to assist flow through your part during the infusion or VARTM (Vacuum Assisted Resin Transfer Molding) process. Resin flows more easily throughout your lay-up, when using 5153 Infusion Flow Green.
TECHNICAL DATA:
| TYPICAL VALUES | |
| Color | Green |
| Material | HDPE |
| Maximum Use Temperature | 200°F (93°C) |
| Thickness, in. (cm) | .033 + .004 (.08 + .01) |
| Construction, strands/in. | 9 |
| Angle | 70° |
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
AVAILABILITY:
Standard Roll Size: 42″ x 350′ (1.1m x 107m)