Pressure Sensitive Rubber Adhesive Nylon Tap
8171 PS is a 2 mil heat stabilized Nylon film coated with a .002″ thick rubber based adhesive.
8171 PS is designed to remove cleanly after autoclave cure cycles of several hours up to 350°F and after shorter cycles at 400°F. 8171 PS has high elongation providing a higher degree of conformability versus polyester Flashtapes.
|Thickness||Film .002″ (.051mm); Adhesive .0015″ (.039mm)|
|Adhesive System||High Temperature Rubber|
|Tensile||35 lb/in. width (150N/25mm)|
|Adhesion to Steel||46oz/in. width (12.5N/25mm)|
|Use Temperature||400°F max. (204°C max.)|
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
Standard roll sizes:
1″ x 72 yd
2″ x 72 yd
Custom sizes available upon request (minimums may apply)