Frekote® Mold Releases
Frekote® brand Release Agents are preferred by more advanced composite molders than all other brands combined. Aircraft Component manufacturers value the non-transferring properties of Frekote® semi-permanent formulations. Other manufacturers rely on Frekote’s® superior multiple release performance. Frekote® semi-permanent release agents are non-silicone materials which bond to tooling surfaces. They do not migrate or contaminate parts, machines or the work environment.
Shop Frekote Mold Release Products Here
| Frekote 44-NC | Provides molders with no release agent transfer (when applied as directed). The multiple release formula gives parts a matte finish. |
| Frekote 700-NC | Maximum multiple release formulations. 700-NC dries and cures at a moderate rate. |
| Frekote 770-NC | Maximum multiple release formulations. 770-NC is a very rapid drying and curing product with low odor. |
| B-15 Sealer | A sealer or base coat material recommended for porous molds. |
| Frekote FMS-100 | A solvent based sealer specifically formulated for use on FRP, epoxy, or other composite mold surfaces. |
| Frekote C-200 C-210 | Mold Release Agents |
| FREKOTE® CS-122™ | This product can be used to seal larger mold porosities. |
| Frekote® CS-123™ | |
| Frekote 55-NC | Faster evaporating and lower odor version of Frekote 44-NC. |
| Frekote 48-NC | Should be your first choice release agent where non transference of release is important. |
| WOLO | A unique polymer release agent that cures quickly and provides multiple release of all polyester resins. |
| SOLO | Contains a unique polymer designed to release all gel-coated fiberglass reinforced and filled polyester composites. |
| Frekote 710-NC | Offers excellent release properties for the most demanding applications. |
| FREKOTE 710-LV | Low VOC solvent-based, Room Temperature Cure |
| FREWAX | Mold Release Agent |
| FMS | Formulated specifically as a sealer for fiberglass reinforced polyester, epoxy and other resin-type molds commonly used in the fiberglass molding industry. |
| Frekote 815-NC | Designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F). |
| Frekote 1711 & 1711-I | Silicone mold release agents offer superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements. |
| Frekote 810-NC | The aerosol version of Frekote 815-NC |
| Frekote Exitt EM | Water-based silicone emulsion that offers superb release properties, excellent part detail, and provides a water-based alternative to solvent-based products to meet your specific molding requirements. |
| Frekote 800-NC | Designed to form a semi-permanent release film on mold surfaces |
| Frekote 720-NC | Specially formulated release system for cast polymer and highly porous tools. |
| HMT | A hot mold touch up version of Frekote 44-NC is formulated for use on molds with temperatures above 60°C (140°F). |
| FRP-NC | A unique release interface specifically formulated for reinforced polyester gel coats (and other associated resin systems). |
| Aqualine C-600 | Milky white emulsion, Water based emulsion, Room temperature cure |
| Frekote Cast Urethane Release | Fast cure, No transfer, Minimal mold build-up, Multiple releases |
| Frekote 901 WB | Non toxic waterbased system, Non-flammable |
| Frekote AC4368 | Mold Release Agent |
| Frekote 915WB | Beige pasty liquid, Water based emulsion, Room temperature cure |
| Frekote LIFFT & LIFFT-I | No mold build up, Easy part clean up |
| Frekote S-50 | Offers excellent release and slip properties and is recommended for the most demanding silicone rubber molding applications. |
| Frekote 1450 | Specifically formulated for use with resin/asbestos products. It has proven to be extremely effective at releasing asbestos/phenolic resin mixtures molded at 150ºC to 165ºC (302°F to 329°F). |
| PMC | A special blend of solvents designed to dissolve and remove wax from polyester molds without dulling the surface. |
| Aqualine Rotolease | A unique water based release agent designed to provide multiple releases with no contaminating transfer. |
| Aqualine RC-321 | Provides a durable release film for most rubber molding applications. |
| Aqualine R-550 | Offers excellent release and slip properties and is recommended for the most difficult molding applications, especially for high aspect ratio parts. |
| Aqualine R-500 | Unparalleled release and slip properties and is recommended for the most difficult rubber molding applications. |
| Aqualine R-180 | Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds. |
| Aqualine R-150 | Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds. |
| Aqualine R-120 | Designed for rubber molding. When properly applied to a preheated surface, this easy to use product chemically bonds to the mold surface to form a thin, inert, thermally stable coating capable of releasing all natural and synthetic polymers including some thermoplastic urethanes. |
| Aqualine R-110 | Designed for rubber molding. Chemically bonds to the mold surface to form a thin, chemically resistant coating capable of releasing all natural and synthetic polymers (except silicone elastomers) and thermoplastic urethanes. |
| Aqualine PUR-100 | For releasing rigid, high-density polyurethane (PU) foam and cast polyurethane parts. |
| Frekote Rimlease 8 | Specifically formulated for use as a release interface for RIM and R/RIM polyurethane processes. |
| PUR-NC | Designed to form a semi-permanent release coating on the mold surface for rigid, cast polyurethane products with application on a mold with a temperature between 20°-150°C (68°-302°F). |