FLASH TAPE 5

Pressure-Sensitive Silicone Adhesive Polyester Tape

DESCRIPTION:
Flash Tape 5 is a multi-purpose .005″ thick, translucent polyester film coated with a .0015″ thick fully cured silicone adhesive.

APPLICATION:
Flash Tape 5 is designed for use where a thicker, stronger flash tape is required.   Flash Tape 5 allows easier removal of excess resin and adhesive flash from metal & composite details. Flash Tape 5 will release cleanly without leaving residue on most surfaces.  It is highly recommended for long term temperature exposures over 350°F.

TECHNICAL DATA:

TYPICAL VALUES
ColorBlue Translucent
BackingPolyester
ThicknessFilm .005″ (.127mm); Adhesive .0015″ (.037mm)
AdhesiveSilicone, fully cured
Tensile, lb./in. width125 lb./in. width (21.5 kg./cm.)
Adhesion to Steel, oz./in. width40 oz./in. width (.45 kg./cm.)
Elongation100% Minimum
Use Temperature400°F max. (204°C max.)

The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.

AVAILABILITY:
Standard Roll Sizes:  1″ x 72 yards
                                     2″ x 72 yards

Custom sizes available upon request (minimums may apply)