Infusion Mesh 200
Our Infusion Mesh 200 works well with polyester, vinylester and epoxy resins. This product does not fray or roll up at the ends when cut.
Infusion Mesh 200 is designed to assist flow through your part during the infusion or VARTM (Vacuum Assisted Resin
Transfer Molding) process. Resin flows more easily throughout your lay-up, when using Infusion Mesh 200.
|Maximum Use Temperature:||200F|
|Roll Size:||48” x 165 ft. (1.2m x 50.3m) |
48” x 350 ft. (1.2m x 107m)
|Thickness:||.054”+/- .002” (.14 cm +/- .005cm)|
|Construction:||12 stands / inch|