FLASH TAPE 1R

Pressure Sensitive Non-Silicone Polyester Tape

DESCRIPTION:
Flash Tape 1R is a multi-purpose .001″ thick, translucent polyester film coated with a .002″ thick high temperature rubber adhesive.

APPLICATION:
Flash Tape 1R is designed for all phases of masking operations where no residue can be tolerated. Flash Tape 1R is perfect for holding release films and fabrics, bleeders and breathers, metal and composite details in place during pre-fit and pre-bond operations.  Flash Tape 1R will release cleanly without leaving residue on metals and composite details.

TECHNICAL DATA:

TYPICAL VALUES
ColorGreen translucent
BackingPolyester
ThicknessFilm .001″ (.025mm); Adhesive .002″ (.051mm)
AdhesiveHigh temperature rubber
Tensile25 lb./in. width (4.3 kg./cm.)
Adhesion to steel30 oz./in. width (.33 kg./cm.)
Elongation100% Minimum
Use Temperature400°F max. (204°C max.)

The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.

AVAILABILITY:

Standard available sizes 1″ x 72 yds.
2″ x 72 yds.

Custom sizes available upon request (minimums may apply)