FLASH TAPE 2
Pressure-Sensitive Silicone Adhesive Polyester Tape
Flash Tape 2 is a multi-purpose .002″ thick, translucent polyester film coated with a .0015″ thick fully cured silicone adhesive.
Flash Tape 2 is designed for use where a thicker, stronger flash tape is required. Flash Tape 2 allows easier removal of excess resin and adhesive flash from metal & composite details. Flash Tape 2 will release cleanly without leaving residue on most surfaces. It is highly recommended for long term temperature exposures over 350°F.
|Thickness||Film .002″ (.051mm); Adhesive .0015″ (.037mm)|
|Adhesive||Silicone, fully cured|
|Tensile, lb./in. width||50 lb./in. width (8.6 kg./cm.)|
|Adhesion to Steel, oz./in. width||35 oz./in width (.39 kg./cm.)|
|Use Temperature||400°F max. (204°C max.)|
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
Standard Roll Sizes: 1″ x 72 yards
2″ x 72 yards
Custom sizes available upon request (minimums may apply)