FLASH TAPE 1
Pressure-Sensitive Silicone Adhesive Polyester Tape
DESCRIPTION:
Flash Tape 1 is a multi-purpose .001″ thick, translucent polyester film coated with a .0015″ thick fully cured silicone adhesive.
APPLICATION:
Flash Tape 1 is designed for all phases of masking operations where no residue can be tolerated. Flash Tape 1 is perfect for holding release films and fabrics, bleeders and breathers, metal and composite details in place during pre-fit and pre-bond operations. Flash Tape 1 will release cleanly without leaving residue on metals and composite details. It is highly recommended for long term temperature exposures over 350°F.
TECHNICAL DATA:
TYPICAL VALUES | |
Color | Blue Translucent |
Backing | Polyester |
Thickness | Film .001″ (.025mm); Adhesive .0015″ (.037mm) |
Adhesive | Silicone, fully cured |
Tensile, lb./in. width | 25 lb./in. width (4.3 kg./cm.) |
Adhesion to Steel, oz./in. width | 35 oz./in. width (.39 kg./cm.) |
Elongation | 100% Minimum |
Use Temperature | 400°F max. (204°C max.) |
The above values are “Typical Values” which have a nominal range about them and are not intended for specification purposes.
AVAILABILITY:
Standard Roll Sizes: 1″ x 72 yards
2″ x 72 yards
Custom sizes available upon request (minimums may apply)